How to Make a Beanbag

One way to get the kind of bean bag chair you want is by making your own. While there are plenty of bean bags out there, you may struggle to find one that has colours or patterns that appeal to you. As long as you know the basics of how to sew, making your own beanbag shouldn’t be too challenging.

The most important thing is to have detailed instructions and good patterns. Bean bag chair patterns are readily available, and we’re happy to provide detailed instructions for your convenience.

What You’ll Need

The most durable bean bag chairs have inner linings and outer covers, and the “beans” are placed in the linings. The beans aren’t beans at all; they’re actually pellets made out of plastic or polystyrene. You can find them at places like Target and K-Mart. You should plan on buying about 500 litters of pellets for an adult-sized bean bag chair.

how to make a beanbagYou will also need:

4.6 metres of fabric, if it is 115 to 122 centimetres wide; or 3.2 metres of fabric if it is 137 to 152.5 centimetres wide.

You will need the same sizes for the cover and the lining.

56 centimetres of zipper

A cutting mat

It is technically possible to sew this by hand, but it will be easier and the results will be better if you use a sewing machine.

Make the Patterns

Find a bean bag chair pattern online. You will need six side patterns for the cover and six side patterns for the lining. Just scale the pattern you find to make the size you need and draw the cutting line accordingly.

For the top pattern, of which you will need just one for the cover and one for the lining, fold a sheet of paper in half. Mark a place about halfway down, and then swing a ruler and draw an arc 14 centimetres from that point.

For the bottom patterns, of which you will need two for the cover and two for the lining, do the same thing that you did for the top pattern, but make the arc 30.5 centimetres from the halfway point. Unfold the paper and draw a line 1.3 centimetres from the fold and cut along it. Discard the smaller piece of paper, and you’ll be left with your bottom pattern.

Sew Your Beanbag

1. Pin together the bottom pattern pieces. Allowing a 1.3-centimeter seam allowance, machine baste the straight edges. Re-stitch with a regular stitch length 2.5 centimetres from the edges.

2. Place the zipper teeth on the seam line and stitch down each side of the tape 6 millimetres from the teeth.

3. Stitch together the long, right sides of the side pieces. Leave a 1.3-centimeter seam allowance. Leave the last stitch open.

4. Catch both seam allowances by top-stitching 1 centimetre from the seams.

5. 1.3 centimetres from the raw edge, stay -stitch the upper edge of the beanbag. Clip seam allowances at intervals of 1.3 centimetres.

6. Divide the outer edge of the top of the bean bag into six equal parts, mark them, and pin them to the upper edge of the bag. Stich a 1.3-centimeter seam.

7. After pressing the seam allowances toward the sides of the bag, top-stitch 1 centimetre from the seam. Repeat the previous two steps, and make sure to leave the zipper partly open.

8. Reach through the opening in the zipper and turn the bag right-side out. Press the bottom seam allowances toward the sides and top-stitch 1 centimetre from the seam.

9. Repeat the same process to make the lining.

10. Insert the lining into the cover and fill it with pellets.

All you have to do now is close the zippers. Your new bean bag chair is now ready to use! Of course, if you can’t be bothered to make your own, you can find an excellent range of products at Bean Bags R Us.

Sharing is caring!


Posted by Geoff Brand  - Bean Bags R Us Australia.


This entry was posted in Bean Bags.